800.969.7153
EN
ENES
MENU
CLOSE
800.969.7153
EN
ENES
MENU
HF 75 Image go back
Conveying

HF 75

The ProStack HF 75 is a High Level Rotating Tracked Feeder Conveyor with a belt length of 22.6 m and a belt width of 1.2 m. A rotating undercarriage gives this conveyor increased versatility and efficiency. The high capacity, customized hopper design efficiently transfers and prevents the bridging of materials.

Capable of operating in a multitude of different working environments, thanks to it’s high level of portability and durability, the ProStack HF 75 can handle any job thrown it’s way. It excels in stockpiling directly from material sources including crushers and screeners while reducing site traffic and removing the need to double handle material.

download brochure
Inquire Call us
HF 75
HF 75
HF 75
HF 75
Features & Benefits Options Specifications
  • High capacity up to 600tph (661 US tph)
  • Maximum feed size up to 150mm (6’’)
  • Eliminates the need for wheeled loaders to create stockpiles
  • Eliminates the need for handling material multiple times
  • Improved material quality due to reduced compaction, degradation, segregation and contamination
  • Can except loads from an excavator, wheeled loader, crusher or screener
  • Multiple hopper options available depending on required capacities and operators loading methods or application
  • Rapid set up time and manoeuvrability around site
  • Reduced fuel consumption due to reduced reliance on wheeled loaders
  • Reduced wear on wheeled loaders where a conveyor is utilised
  • Hydraulic discharge height adjustment
  • Hydraulic fold over for transport
  • Rosta scraper
  • Kick out sensor stops feeder if discharge belt is under extreme load
  • Pinless deployment
  • Discharge conveyor head drum bearing automatic greasing
  • External conveyor belt adjustment
  • Engine pre-start delay & siren
  • Emergency stops x 3.
  • Dust hood
  • Canvas dust covers complete with dust hood on discharge conveyor
  • Twin drive discharge conveyor (Recommended to also select
  • Full length skirting rubber along discharge conveyor
  • High spec head drum scraper on discharge conveyor (plain belt
  • Anti-roll back flaps
  • Heavy duty plain discharge belt EP500 4 Ply x 8 + 2 covers.
  • Ceramic lagging on discharge conveyor drive drum
  • Ceramic lagging on feed conveyor drive drum
  • Discharge conveyor under guard for mid-section
  • Dust suppression (spray bars only)
  • Belt weigher
  • Overband magnet on discharge conveyor complete with hydraulic kit and support frames
  • Radio remote to start / stop feeder, raise / lower discharge conveyor & tipping grid if selected
  • Pull cord E-Stop running the length of the conveyor
  • Radio remote control for tracking
  • Feedboot lined AR400 6mm wear plate
  • 6mm mild steel liners bolted into hopper
  • 6mm AR400 wear plate liners in hopper
  • Twin drive feed conveyor
  • 4’’ or 6’’ tipping grid fitted to feed conveyor
  • Integrated fall break system bolted into hopper
  • 500mm (20’’) hopper extensions with fall break system in hopper
  • 700mm (28’’) hopper extensions with fall break system in hopper
  • Machine prepped hydraulically to tip a grid including remote
  • Machine prepped hydraulically for DDVG including remote control (no DDVG supplied)
  • Discharge conveyor chevron belt EP315 3 ply 3 + 1.5 covers
  • Grade IS0 68 hydraulic oil (recommended for ambient temperatures between +15 and +50 degrees Celsius)
  • Grease lines to head drum
  • Length: 19.5m (63’)
  • Feeder belt width: 1200mm
  • Discharge Height @18°: 8m (26’ 3’’)
  • Stockpile Capacity @18° & 37° Angle of Repose: 944m³ (1235 Cu.Yd)
  • Discharge Height @24°: 9.8m (32’ 2’’)
  • Stockpile Capacity @24° & 37° Angle of Repose: 1735m³ (2270 Cu.Yd)
  • Power Unit: Tier 3 CAT 4.4 83kW (111hp), Tier 4F CAT 4.4 82kW (110hp) or Stage V CAT 3.6 82kW (110hp)
  • Tracks Shoe Width: 400mm (1’ 4’’)
  • Tacks Sprocket Centre: 4300mm (14’ 1”)
  • Tacks Outer Width: 2750mm (9’)
  • Hopper Capacity (Tipping Grid Fitted): 7m³ (9.15 Cu.Yd.)
  • Hopper Capacity (No Tipping Grid Fitted): 6.4m³ (8.4 Cu.Yd.)
  • Weight: 24,350kg (53,683bs)
closeClose
HF 75

Product Inquiry

    Crushing
    Screening
    Washing
    Grinding & Shredding
    Conveying